











Matt's Belt
This is the design of belt that I personally wear - Crafted from a heavy, 3.7mm (9oz) leather, vegetable-tanned by the Walpier tannery in Italy and a solid brass roller buckle. Two traditional copper rivets are handset around the buckle, chosen as they are the strongest method of securing the belt. Pure copper will also patina beautifully alongside the leather and brass.
Leather: Walpier Rocky (Italy)
Colour: Cuoio (Medium Brown with Red Undertones)
Width: Approximately 34.5mm
Buckle: Solid Brass Roller Buckle (Italy)
Rivets: 8mm Solid Copper (England)
Edge Treatment: Lightly Burnished
PLEASE BARE IN MIND that unlike normal belts, the lengths for my belts are measured from the buckle to the centre hole. I, for example, wear a 34-inch belt with 30-inch jeans. If you’re not sure what size fits you, you can measure a belt you already wear from the base of the buckle to the most used hole.
This is the design of belt that I personally wear - Crafted from a heavy, 3.7mm (9oz) leather, vegetable-tanned by the Walpier tannery in Italy and a solid brass roller buckle. Two traditional copper rivets are handset around the buckle, chosen as they are the strongest method of securing the belt. Pure copper will also patina beautifully alongside the leather and brass.
Leather: Walpier Rocky (Italy)
Colour: Cuoio (Medium Brown with Red Undertones)
Width: Approximately 34.5mm
Buckle: Solid Brass Roller Buckle (Italy)
Rivets: 8mm Solid Copper (England)
Edge Treatment: Lightly Burnished
PLEASE BARE IN MIND that unlike normal belts, the lengths for my belts are measured from the buckle to the centre hole. I, for example, wear a 34-inch belt with 30-inch jeans. If you’re not sure what size fits you, you can measure a belt you already wear from the base of the buckle to the most used hole.
This is the design of belt that I personally wear - Crafted from a heavy, 3.7mm (9oz) leather, vegetable-tanned by the Walpier tannery in Italy and a solid brass roller buckle. Two traditional copper rivets are handset around the buckle, chosen as they are the strongest method of securing the belt. Pure copper will also patina beautifully alongside the leather and brass.
Leather: Walpier Rocky (Italy)
Colour: Cuoio (Medium Brown with Red Undertones)
Width: Approximately 34.5mm
Buckle: Solid Brass Roller Buckle (Italy)
Rivets: 8mm Solid Copper (England)
Edge Treatment: Lightly Burnished
PLEASE BARE IN MIND that unlike normal belts, the lengths for my belts are measured from the buckle to the centre hole. I, for example, wear a 34-inch belt with 30-inch jeans. If you’re not sure what size fits you, you can measure a belt you already wear from the base of the buckle to the most used hole.
If you wish to order a belt that’s a little different, be it a change of colour, leather selection, taper style or a specific length, please use the contact form at the bottom of the page.